Super CAN Filter support BMW CAS4 and FEM, MB W212 W221 W164 W166 W204, Renault Laguna III, Megane III, Scenic III

CANEMU configuration and functions can be set by soldering configuration jumps.

Super CAN Filter support:

BMW CAS4 and FEM

MB W212 W221 W164 W166 W204

Renault Laguna III

Megane III, Scenic III

Support models: 1 Series-F2x, 3 series-F3x, X5-F1x, ect. All FEM module

only remove the instrument, connect SUPER CAN FILTER to the instrument, then change mileage in 160DQWQ. You don't need disassembly the FEM module!

Out technician will tell you how to connect the SUPER CAN FILTER with the instrument.

* Mercedes S-class W221 2007+, new C-class and CLC-class W204 2008+, ML W164 2007+, GL X164 2007+, R-class W251 2007+ , E-class W212 with NEC processor. CANEMU block odometer value from EZS (EIS). If Mercedes CAN filter is installed in EZS, dealer workshop scanner (like Mercedes StarDiagnosis or Xentry) will show main odometer mileage in EZS the same, as in instrument cluster.

* BMW F-series cars CAS4. CANEMU block odometer value from CAS4 to instrument cluster and diagnostic tester. If CANEMU is installed in CAS4, dealer workshop scanner (BMW ICOM or INPA) will show main odometer mileage in CAS4 the same, as in instrument cluster.

* Renault Laguna III 2008+, Scenic 4 2009+, Megane III 2009+.  If CANEMU is installed in cluster, no need for ABS programming, just change original odometer value in dashboard ( instrument cluster)

CANEMU is tested on F01, F02 with 1L15Y processor, F10 and F07 (BMW GT) with 1L15Y and 5M48H processors and on F25 ( new X3). After CANEMU instalation diagnostic tester (BMW ICOM or INPA) shows in CAS4 the same mileage as on instrument cluster.

Also works for older cars like E-class W211, S-class W220, Sprinter. Can be installed also in instrument cluster, but in this case in EZS-EIS will stay old odometer value.

W204 instalation example:

Renault Laguna III connection - short configuration jump 3 like in picture and change KM in dashboard:

Super CAN Filter FEM Picture: